Storage arrays P2000 and MSA 2040 - Getting disk drive model using telnet / CLI.

[zaicnupagadi]

Hey all,

Is it possible to get disk drive model using CLI ? I've spent some time on it today and I am affraid that an answer will be that no.

show disks command is getting me serial number, but not model.

Why I need that model numer - I made a script that parses HP website for newest firmware for particular drive and instead of building a JSON or any other file with our curent status manually, I would like that script simply to get model numbers directly from storage array.

Would that be feasable?

Thanks for your help guys!

[Mark_Butler]

Hello Zaicnupagadi,

I think you may be asking the wrong team your question.  It sounds like you would like to use the CLI for the P2000 or MSA 2040 to query information.  This forum is for Storage Essentials or Storage Operations Manager, which are HP Software products to monitor Storage, Switches and Hosts.

I suggest that you post your question on the Storage HW Community Forum.  You can access it at the following URL:

http://community.hpe.com/t5/Storage/ct-p/itrc-120

I'm sorry that we couldn't help you.  I hope that this information on where you can post your question is helpful.

Regards,
Mark

[zaicnupagadi]

Hi Mark,

Appreciate your help on this! Will make a new thread in the location you have proposed.

Cheers!

Pedro