Unable to delete a host or host group from the MSA 2060 FC

[KKishore]

Dear Team,

I am unable to delete a host or host group from the MSA 2060. I have two hosts, each with two initiators. Initially, I created a host with a single initiator, and it worked fine. I now want to add a second initiator for redundancy to the same host. When I attempt to delete the existing configuration, I encounter an error stating, "Invalid or ambiguous parameter found."

I request your support in resolving this issue.
Thanks
Kishore

[support_s]

System recommended content:

1. HPE MSA 1060/2060/2062 CLI Reference Guide

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.

[venkat_y · Accepted solution]

Hello@KKishore,
You may delete the host or host group directly, but before doing so, please ensure that there are no volumes mapped to the host. If volumes are mapped to the host, they should be unmapped. Deleting a host will ungroup its initiators, but they will still be visible if they are physically connected to the system. You may check with the show maps command.

To add an initiator to an existing host:
1. select Provisioning>Hosts> select the All initiators.
2. Select the second initiator from the listed initiators.
3. Add the selected initiator to the existing host with the help of the Add To Exist Host option.
4. Add to Exist Host screen cappers on the screen, and select your Host form available Hosts.
5. Click ADD TO HOST.

Hope this helps!
Regards,
Venkat

[KKishore]

@venkat_y  Thank you for the support. I have added the initiator to the existing host, and the issue has been resolved.

[venkat_y]

Hello@KKishore,

That's Excellent! 

We are glad to hear that the issue has been resolved and we appreciate your updates.

Thank you!
Regards,
Venkat