AFT on Windows 2000

[Alejandro Benitez_1]

Ok!
Works great...
I can add my two onboard cards to a team, but How to set up a virtual IP fot Fault tolerance ?
First the IP is "Not Assigned" then the W2K set an APIPA IP (169.254.....)

Thanks!
Alejandro

[Greg Carlson]

Alejandro,

Check out this post on the very same issue. This should help you out..

Ciao,
Greg

[Greg Carlson · Accepted solution]

Alejandro,

Sorry.. forgot to paste the link in the last post.

http://groups.google.com/groups?q=%22virtual+IP%22+aft&hl=en&selm=fa.kb5dsrv.ohsjal%40ifi.uio.no&rnum=1

Ciao,
Greg

[Alejandro Benitez_1]

ok, ok....
Sorry, but when I finished the "New Message" I saw that this would be an answer...
but it was to late.
sorry again...

Ok, the link was great...

Another one, on the lp1000r what is better to use PRO SET I or PRO SET II, i don't know if the lp1000r's nics support PRO SET II.
I installed PRO SET II downloaded from INTEL over PRO SET I, but doesn't work.

Tomorrow I'll try with your google link and if INTEL PRO SET I works ok..

Thanks again...
This is finnaly an answer
Alejandro

[Theo Hill_1]

if the NIC driver you are using is the E100BNT5.sys then use Pro Set II. If you are using the HPTXNT5.sys, use HP set.