How do I load SCSI drivers on DOS Boot floppy for Netserver LC2000?

[David Foster_4]

Hello,

I am building an IBM DOS floppy for my NetServer LC2000 so that I can create a Ghost image of the RAID. In Ghost, I can see the RAID partition that I want to image just fine. However, during DOS startup, ASPI8XX doesn't find the common tray SCSI drive which is where I want to write my image. I think I need to add something to my Autoexec.bat to load the drivers for the embedded SCSI host, or something like that.

Does anyone know how to make a common tray SCSI device available to IBM DOS?

BTW, I am initializing DEVICE = ASPI8XX.SYS
DEVICE = SYMDISK.SYS in my config.sys.

Thanks,
Dave

[Greg Carlson]

Dave,

The DOS drivers are actually available on the LC 2000 download page.

http://h20004.www2.hp.com/soar_rnotes/bsdmatrix/matrix50440en_US.html

The embedded SCSI on the lc2000 is the symbios controller.

Ciao,
Greg

[Harold Morgan]

I can't help with this problem, but I wanted to know if I could have a copy of your navigation CD. I have the same machine, but did not get a navigation cd with it and i cannot install an operating system to the machine. Ofcourse I am trying to get windows 2000 server for this. Do you know of anyone willing to sell theres also. please call me at 810-449-0513 if you can help or email me at halmorgan2@aol.com. If you know where I could get it online this would also help for the hp netserver lc 2000