LH 3000 stop 0x0000000a ntoskrnl.exe WINDOWS2000SRV

[luca_51]

Hi everyone, i am installing windows2000 srv on Netserver LH 3000 and, after setup(after formatting and file copying) system show me blue screen with this message:

stop 0x0000000a ntoskrnl.exe, what can i do?

Thanks a lot

Luke

[Greg Carlson]

Luke,

Start with the basics and take it down to one stick of memory (128mb) is base for that system. Single CPU and verify that you are skipping mass storage detection on booting to the 2000 CD by pressing F6. Then load the netraid driver manually.

Create the driver disks for 2000 and also grab the BIOS and Netraid FW and flash them as well to make sure you have the last bios available.
http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?locale=en_US&pnameOID=19611&taskId=135&prodTypeId=15351&prodSeriesId=77403&submit.y=0&submit.x=0〈=en&cc=us

Start here and let us know if it helps.
Greg

[luca_51]

Thanks for reply,

Yes i have already done this, but system doesn't work; when i change system memory cache on BIOS (i select off memory caching) Windows HANGS on windows2000 GUI, instead showing blue screen with stop 0x000000a.
This is my test results.

I don't know where is the matter!
Luke