LH3r Megaraid / Netraid question

[Joseph Durnya]

originally starting with the lh3r i have added 6 rs 12's on 2 netraid cards everything worked great until i tried to reboot the server. it looks like the machine is looking to one of the netraid cards for the boot device.. i have tried to go into configurator and disable the bios but it disables ALL the bios' on all 3 raid cards and again no boot.. if i take the netraid cards out ... it works great.. any ideas ?

thanks

J

[Marino Meloni_1]

hi
if you need to desable the bios of one netraid but you have more that one on your system, you need to remove all the netraid, and start with one card at a time, enable or desable the bios on this card, label it to be sure what is the status of the bios on this card, and reput inside the server all the card, unfurnatley the netraid bios cannot be managed in other way at the moment
bye
marino

[Joseph Durnya]

just one problem with that !!! the other netraid card is built onto the motherboard !!!!



LOL

Joe

[Ben_16]

This is a fable. It has never worked. If you enter the BIOS of the RAID controller after doing this mumbo jumbo, please look at the setting of the BIOS to see for yourself.

Better is to look at the boot order PCI card before or after???

Ben

[Ben_16]

It can be found in Boot device ordering, then hard drive priority.