HPE Community
Netservers
1846418 Members
3107 Online
110256 Solutions
New Discussion

Re: Netserver change HDD

 
SOLVED
Go to solution
HeKi
New Member

‎06-24-2005 01:10 AM

‎06-24-2005 01:10 AM

Netserver change HDD

We are using one LC2000 with Raid-5(1si) on NT4.0, including three good-running but very small 9GB-HDDs. We now want to change to three 36GB-HDDs. Is there any possibility to change the drives using swapping drive-by-drive, without re-installing the OS and without loosing any space on the new drives? Any suggestions please? Thanks a lot in advance! Herwig
0 Kudos
2 REPLIES 2
Oguz Kutlu Asik
Honored Contributor

‎06-25-2005 05:34 AM

‎06-25-2005 05:34 AM

Solution

Re: Netserver change HDD

Hi,

Take an image of partitions (partition to file method) with norton ghost or something, take out old disk and put new ones, make raid configuration, install a clean OS and make partitions just like the old ones, then restore images over newly installed OS.
What's right is right, whether or not God exists
HeKi
New Member

‎06-27-2005 12:37 AM

‎06-27-2005 12:37 AM

Re: Netserver change HDD

Hi, thanks a lot für the quick answer - I'll take this way as soon as possible. Herw
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.