Netserver LT6000r netraid service failure

[Jon Pedersen]

Lt6000r u3 running Win 2000 Server sp3. System get rebooted after patches and reports that during windows startup that the Netraid service fails to start. It reports in a Netraid.log event that the monitor can't find an adpater. The LT6000r u3 has the integrated Netraid controller. Windows boots up normally, everyone can access the system and data drives, however trying to access the disk system using the Netraid assistant it comes back with a can't connect to server error. The netraid service could not start at boot time and won't take a restart. There were no controller errors at boot time. Any ideas?

[amhakassa]

Hi Jon,

Uninstall and reinstall the netraid assistant, that should solve the issue. here is the link to download it
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?locale=en_US〈=English&pnameOID=19837&prodSeriesId=50459&prodTypeId=15351&basePartNum=COL3578&locBasepartNum=ns-12645-1&os=Microsoft+Windows+2000+Server&tech=Software++Storage+Controller

I hope this will help

regards
Amha Kassa

[Tony Roberts, Ph.D.]

I have a similar issue. I am trying to install SCO Unix on an HP LH3 with dual HD and Netraid installed. SCO fails as "no root drive found" due to the logical name use by Netraid. I bought the server with Netraid preinstalled and received no disks or documentation on Netraid. How do I uninstall it so I can load my OS?