NVRAM and Disk Configuration mismatch

[Jonatan_1]

I have an LH3000 netserver with 4 x 18.2GB hard drives configured in raid 5. Yesterday there was a power interuption and when I booted it up after the power problem is solved I got an NVRAM and Disk Mismatch, Can Any body Help?

Jonatan

[amhakassa · Accepted solution]

Hi Jonatan,

When you bott the server up press CTRL + M to get in to the netraid express tools.

1 select Configure
2 Select Add/View/Delete option
you should get to choos between Viwe NVRAM configuration and Disk Configuration
Have a look at both the configuration (you probabily get one of the configuration as all 4 drives ready and on the other configuration all drives online) and save the one with all drives online.

That should take care of it.

Regards
Amha Kassa

[amhakassa]

Hi Jonatan,

If you don''t have netraid assistant already installed on your server, you can download and install it from the foloowing link
http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?locale=en_US&pnameOID=19774&taskId=135&prodTypeId=15351&prodSeriesId=74580〈=en&cc=us

and select your operating system, the download and instal the Utility under "Software Storage Controller". You will be prompted to restart the server after the installation , but if you do not want to restart you can say no it will still work

regards
Amha Kassa

[amhakassa]

Hi Jonatan,

My apology the last post is for your problem on the LH 3.

Amha Kassa