HPE Community
Netservers
1821808 Members
3242 Online
109638 Solutions
New Discussion юеВ

Pulling data from an Ultra 3 SCSI Drive

 
Jake Mac
New Member

тАО08-04-2006 03:35 AM

тАО08-04-2006 03:35 AM

Pulling data from an Ultra 3 SCSI Drive

I'm not familiar with SCSI drives, so please pardon my stupidity.

We just had a NetServer LC2000 die on us & I'd like to pull the data off of the hard drive. It is an 18.2 GB Ultra3 SCSI. There were 2 of them in there, so I assume they were mirrored. I don't have another LC2000 machine to put these into, so how can I pull the data off of the hard drives?

Your help will be greatly appreciated.
0 Kudos
3 REPLIES 3
Torsten.
Acclaimed Contributor

тАО08-04-2006 03:50 AM

тАО08-04-2006 03:50 AM

Re: Pulling data from an Ultra 3 SCSI Drive

Probably you need to do some handicrafts.

I assume the drive was connected to a netraid controller. you need to use this controller (in another system) to access the data.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Jake Mac
New Member

тАО08-04-2006 03:54 AM

тАО08-04-2006 03:54 AM

Re: Pulling data from an Ultra 3 SCSI Drive

Can I install that controller in just a regular desktop PC?
0 Kudos
Torsten.
Acclaimed Contributor

тАО08-04-2006 04:01 AM

тАО08-04-2006 04:01 AM

Re: Pulling data from an Ultra 3 SCSI Drive

No idea. Try it and you will know it.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.