Upgrades for Netserver LC

[Jeff Billman]

I have a 100Mhz Netserver LC and I was wondering if there is any way to put a faster processor in this box? I put a 133Mhz processor in the box and set the jumpers but all I got was 100Mhz out of it.

[Dries Bertier]

According to http://netserver.hp.com/docs/download.asp?file=ds_lc.pdf it should handle processors up top 166 MHz.

Dries

[Marino Meloni_1]

hi
first of all, be sure to put the last bios version,
set the jumpers j2 for the speed ( 2-4 and 3-5) and for j1 for VRE
the new processor usualy is autodetect
at the first reboot you wil get a message asking you to save the new config
start with ECU and check in view edit detadil,exit and save config.
bye
marino

[Dries Bertier]

Have a look at the picture for jumper settings.
It should work !

Dries

[Marino Meloni_1]

here is the link for last bios and ECU
bye

http://www.hp.com/cgi-bin/cposupport/swindex.pl?p=hpnetserve5436&l=en&c=BIOS