HPE Community
Netservers
1827066 Members
4050 Online
109713 Solutions
New Discussion

Re: We want to remove disk array

 
Hamdi GULSOY_1
Occasional Contributor

‎12-13-2002 05:48 AM

‎12-13-2002 05:48 AM

We want to remove disk array

hi,
step-1
we have got hp lx pro netserver. (running MS-NT 4,0 SP3)we have five arrays with different raids.
Array-5 has 1 disk raid 0.
We want to remove disk and array-5 without demage other disk data.
how can we do this?
34
0 Kudos
1 REPLY 1
Terri Harris
Honored Contributor

‎12-13-2002 02:24 PM

‎12-13-2002 02:24 PM

Re: We want to remove disk array

The HP NetRAID array allows the deletion of the last configured array only. For example, if you created a RAID 1 first, then a RAID 5, then a RAID 0, you would have 3 arrays. Assuming each array was configured as a single logical drive, the RAID 1 = LD 0, RAID 5 = LD 1, RAID 0 = LD 2. This has nothing to do with what has been configured in the operating system itself. This is specifically what is configured from the HP NetRAID tools. In this scenario you can delete RAID 0 since it is the last configured array.
Otherwise you cannot remove an existing RAID array without the array being reported as FAILED.
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.