Simulation tool GNS3 Comware 7 + IOS

[luchoArgentina]

Hi everybody,

I'm new to the HP environment, I always worked with Cisco. Now there's been a fusion between different areas in my company and we have to manage Cisco and HP devices. I was wondering if there was any VM I could install or something like that in order to simulate the behaviour, learn and test devices compatibility with GNS3 for example.

Does HP provide something like that? a router VM for example? We have the following devices in our network:

HPE Comware Software, Version 7.1.054, Release 7103P12
Copyright (c) 2010-2016 Hewlett Packard Enterprise Development LP
HPE HSR6602-XG uptime is 15 weeks, 4 days, 7 hours, 10 minutes
Last reboot reason : Power on
Boot image: flash:/HSR6602-CMW710-BOOT-R7103P12.bin
Boot image version: 7.1.054, Release 7103P12
  Compiled Dec 06 2016 16:00:01
System image: flash:/HSR6602-CMW710-SYSTEM-R7103P12.bin
System image version: 7.1.054, Release 7103P12
  Compiled Dec 06 2016 16:00:01
Feature image(s) list:
  flash:/HSR6602-CMW710-DEVKIT-R7103P12.bin, version: 7.1.054
    Compiled Dec 06 2016 16:00:01

Slot 0: HSR6602-XG uptime is 15 weeks, 4 days, 7 hours, 10 minutes
 CPU type: FREESCALE P4080 1500MHz
 4096M bytes DDR3 SDRAM Memory
 8M bytes Flash Memory
 128K bytes NVRAM
 PCB              Version: Ver.A
 Basic      Logic Version: 1.0
 Extend     Logic Version: 2.0
 Basic   BootWare Version: 2.04
 Extend  BootWare Version: 2.04
 [FIXED PORTS] MGE              (Hardware)Ver.A,   (Driver)1.0,   (Cpld)2.0
 [FIXED PORTS] Combo 4GE        (Hardware)Ver.A,   (Driver)1.0,   (Cpld)2.0
 [FIXED PORTS] 2XGE             (Hardware)Ver.A,   (Driver)1.0,   (Cpld)2.0

Slot 1: FIP-20 uptime is 15 weeks, 4 days, 7 hours, 10 minutes
 PCB              Version: Ver.A
 Logic            Version: 1.0
 Basic   BootWare Version: 0.00
 Extend  BootWare Version: 0.00
 [SUBSLOT   1] RT-HIM-2EXP      (Hardware)Ver.A,   (Driver)1.0,   (Cpld)1.0
 [SUBSLOT   2] The SubCard is not present

I've already downloaded and read some of the troubleshooting and configuration guides for Comware v7 but I would to test it in a lab.

Thanks in advance!

Regards,

Luis

[SantoshPG]

Hi Lucho,

For Comware switches, There is a HCL (H3C Cloud Simulator)  Its a drag and drop application which can simulate Comware 7. The HP Comware Lab, is a graphical user interface for the network device emulation software. With the HP Comware Lab, the user can virtualize various models of the HP network equipment and configurations to build a virtual network environment.

You can download the application from  here  :- https://support.hpe.com/hpsc/swd/public/detail?sp4ts.oid=7107839&swItemId=nw_148568-1&swEnvOid=4184

I found a document which as information on how to integrate HCL with GNS3 . Hope this helps

https://community.arubanetworks.com/aruba/attachments/aruba/DataCenter/16/1/Integrating%20the%20HP%20Network%20Simulator%20with%20GNS3%20v.0.5.docx

if I've helped, please give kudos

Thanks,

[yohnF]

tools of year 2015 and addons more old, umm is your time

[yohnF]

si compraste dispositivos hpe, lo siento no hay nada de ello hay una tool hcl pero es super antigua y tira un lios echarla a andar.

[eneidercolina]

Puedes descargar la última versión del laboratorio de la página de H3C; la última versión del software es del 2017 y si funciona perfectamente.

Acá puedes descargarlo (toda la pág está en chino pero puedes utilizar el traductor y descargarlo e instalarlo en inglés sin problemas)

http://www.h3c.com/cn/d_201410/842486_30005_0.htm