Networking
All Networking boards are read-only. Please visit https://community.arubanetworks.com/discussion to start a discussion
1844910
Members
1373
Online
110233
Solutions
Latest Articles and Discussions
Logon on a IMC (E0705P07) Password Strategy
Posted to: IMC
11-25-2020 Hi@allI have a new IMC server with patch level "PLAT 7.3 (E0705P07)" after logging in I always get the message:"To ensure security, please go to the System> Operator Management> Password St ...
0
Kudos
1172
Views
1
Reply
Irf issue
Posted to: Comware Based
11-25-2020 Hi there, I seem to be having an issue with IRF , can some one aid. 1 of the interfaces on each member showing disable, assuming this is incorrect.. Do I need to redo the config?Here is the ...
0
Kudos
4979
Views
2
Replies
VOIP Configuration - HPE 5945 & Procurve Switches
Posted to: HPE Aruba Networking & ProVision-based
11-25-2020 Hi all I'm new to Comware switches and Im configuring new HPE 5945 core switches with Procurve attached as edge switches. We have two cores and I'm using VRRP for high availablility.Pr ...
0
Kudos
1582
Views
0
Replies
HP V1910 VLANs?
Posted to: Network Simulator
11-24-2020 Hello Guys!This is my first HP switch I have to deal with, and I have ran into a problem.My config is the following:port 48 : Internet Router with DHCP, port mode: Hybridport 1 , 2, 4-44: Default ...
0
Kudos
2921
Views
1
Reply
Loop back Problem
Posted to: HPE Aruba Networking & ProVision-based
11-24-2020 Dear All,I have Switch HP 2530 ( J9773A-24G-POE), And I want know if this switch has "Ethernet Ring Protection Switching Protocol" or not? To avoid data loop back problem or sothing lik ...
0
Kudos
1680
Views
2
Replies
Stacking (VSF) Aruba Switches
Posted to: Switching and Routing
11-23-2020 I noticed some shiny Aruba switches on the bench today, they were for a job my colleague is working on. (Note: Each switch in a stack should be the same model, so these will need two stacks!) I w ...
0
Kudos
1809
Views
1
Reply