Networking
All Networking boards are read-only. Please visit https://community.arubanetworks.com/discussion to start a discussion
1844902
Members
2837
Online
110233
Solutions
Latest Articles and Discussions
Problem put the 10 g interface to work on the blade.
Posted to: HPE Aruba Networking & ProVision-based
11-03-2020 We were using the "ProCurve 6120G / XG Blade Switch" switch in which it works normally on Ethernet interfaces. Only we needed a 10 g interface and we got the "hp vc flexfabric 10gb / 24-port modu ...
0
Kudos
2622
Views
2
Replies
how to configure access list in hp5510 switch to stop inter vlan ...
Posted to: Comware Based
11-03-2020 Hi team in my organization 2nos HP5500 switch with HA (IRF) configured. now my boss to stop inter vlan routing and only one server (office CRM) will be accessible from all invironment .total 20no ...
0
Kudos
2862
Views
2
Replies
What to expect removing switches from stack
Posted to: HPE Aruba Networking & ProVision-based
11-02-2020 I'm going to be removing three switches from a stack in ring topology, leaving three in the stack. I have the command to remove the switches from the stack, just curious as to what behavior to ex ...
0
Kudos
3961
Views
8
Replies
• HPE 5510 48G 4SFP+ HI 1-slot Switch - LACP configuration assist ...
Posted to: Comware Based
11-02-2020 I want to configure a ‘trunk’ of 4 ports using the LACP protocol in HP5510-48G comware switch for load sharing. I found that Bridge-Aggregation is used in A5500-48G( comware ) , instead of L ...
0
Kudos
5163
Views
7
Replies
how to disable intervlan routing in hp5500 L3 Switch
Posted to: Comware Based
11-02-2020 Hi team I need to disable intervlan routing and only have to allow one server from management vlan. So pls provide the solution for the same. I ahve total 15 vlan 1) Nedd to disable Int ...
0
Kudos
3566
Views
3
Replies
IRF Mode Issue
Posted to: Comware Based
11-02-2020 Hi team, We are facing issue in HPE 6800 Router chassis. We need two interfaces need to configfuraed for IRF for each Router chassis. but allowed one ...
0
Kudos
5341
Views
8
Replies