100VG AnyLan is not working after upgrade

[Sachin Patel]

I just install new OS 11.00 from Dec-2000 Cd on K-class system. Where is the driver for 100Vg Anylan card.

Here is the output of my swlist so far
A3402A B.11.00.02 EISA 100VG-AnyLAN/9000
A3659A B.11.00.07 EISA FDDI/9000 Driver for Servers
B5502BA B.11.00.07 EISA FDDI/9000 Driver for Workstations
HPUXEng32RT B.11.00.01 English HP-UX 32-bit Runtime Environment
HWE1100 B.11.00.0112.7 Hardware Enablement Patches for HP-UX 11.00, December 2001
J2694BA B.11.00.02 EISA 100VG-AnyLAN/9000
QPK1100 B.11.00.54.7 Quality Pack for HP-UX 11.00, September 2001
UXCoreMedia B.11.00.02 HP-UX Media Kit (Reference Only. See Description)
UnlimUserLic B.11.00.02 HP-UX Unlimited-User License
XSWGR1100 B.11.00.47.08 General Release Patches, November 1999 (ACE)


Here is the output of lanscan
Hardware Station Crd Hdw Net-Interface NM MAC HP-DLPI DLPI
Path Address In# State NamePPA ID Type Support Mjr#
10/12/6 0x080009DAC455 0 UP lan0 snap0 1 ETHER Yes 119

Is there something else I have to install or do something else?

Sachin

[Sachin Patel]

This was my old lanscan while we have 10.20 OS

10/16/8 0x000077899703 1 up ivg1 up 4 ETHER yes 75
10/12/6 0x0800009DAC455 1 UP lan0 DOWN 5 ETHER Yes 52

Sachin

[Ashwani Kashyap]

Are u sure , your NIC card is EISA based and not HPPB or HSC based . I am not aware that K class supports EISA bus .

[Sachin Patel]

What is the driver for HPPB card?

Sachin

[Sachin Patel]

You right it is HP-PB card.
Where can I find a driver

This was swlist when I have 10.20
IVG_Driver SX00156-A07 Interface HP-PB 100Vg Driver

Sachin

[Ashwani Kashyap]

THe driver should be on the first CD of the applicationd CD's pack . It could be codeword protected . If thats the case get the codewords from HP .

You can also try on www.software.hp.com and search for your driver .

[Technical Support_2]

I can't find it. doyou have name, number of this driver anything?

Sachin

[David Bell_1 · Accepted solution]

Sachin,

It would appear that this is an Interphase card. Although perhaps marketed by HP, the card and driver were created there. I'm unable to find ANY documentation on the HP-PB version with the exception of one used in MPE/iX (HP's 3000 line if you're unfamiliar). All other references are to the EISA version used in the D-Class.

In going to Interphase Corp site, there is nothing available for drivers beyond HP-UX 10.X. If you'd like to look at the information that was available such as the users guide, it's at the following URL and ftp site.

http://www.iphase.com/docs/pdfs/userguides/5022-000UG.pdf

ftp://ftp.iphase.com/pub/ethernet/hppb/

HTH,

Dave