11i v3 can not see EMC DMX lun

[darren_16]

Hi,

I have two rx8640 install hpux 11.31 and use EMC DMX2000 storage, these 2 hpux use the same FA port of DMX2000 and I present 100 LUNs to host_A the id from 00 to 99 without any problems but when I present another lun form id 100 to id 115 to host_B, I can't see any lun after I do ioscan, but if I also present the lun id 0 both to host_A and host_B , then host_B can see the lun from 100 to 115, I ever seen this problem in hpux 11.00 and there is a patch PHKL_24004 to fix this problems, but I haven't seen any patch to fix the problem in 11.31, can anyone help me?

[Steven E. Protter]

Shalom,

use fcmsutil to display the HBA cards WWN, World Wide Number.

Check that presentation of the LUNS use this number(s).

ioscan -fnC disk

report results.

Be prepared to reboot to get system to recognize the LUN.

What bi-annual 11.31 OS update is installed? Consider installing the latest.

A search of the itrc patch database would also be useful.

SEP

[Duncan Edmonstone]

Does the FA have the SPC-2 setting applied to it? It needs to for 11iv3 hosts. If this means nothing to you, it should do to EMC...

HTH

Duncan