1834631 Members
3082 Online
110069 Solutions
New Discussion

700/RX Locked On Boot

 
Rashid Khan_1
New Member

700/RX Locked On Boot

I recently recieved a 700/RX from a friend who informed me that he had set the gateway IP and the IP of the machine to the same value, this causes the machine to not go past the "initializing gateways" message. If you attempted to abort or get to the config screen the machine locks up hard. Same with the F12 key, makes it lockup. I also heard ctrl+alt+f9 from someone, which does nothing. Please let me know if there is a solution to this
the pursuit of happiness is the fun
3 REPLIES 3
Tommy Palo
Trusted Contributor

Re: 700/RX Locked On Boot

Do you have it connected to the network when booting ? If so, try booting with no network.
Keep it simple
Alexander M. Ermes
Honored Contributor

Re: 700/RX Locked On Boot

Hi there.
If the disconenct to the network does not work,
try to boot the thing without the network interface, change the network config and replug the interface. Then try to reboot.
Rgds
Alexander M. Ermes
.. and all these memories are going to vanish like tears in the rain! final words from Rutger Hauer in "Blade Runner"
Alex Glennie
Honored Contributor

Re: 700/RX Locked On Boot

to reset to Factory defaults :

1) Via xterminal config screen : accessed by holding down key or by interrupting boot process and going into config => diagnostics => reset to defaults.

My guess is you can't use the above method so =>

after the first 2 beeps will factory default it also ... just don't be too quick to let go the keys.

good luck !