Operating System - HP-UX
1855308 Members
2086 Online
104109 Solutions
New Discussion

a question about HP Smart Array ON hp superdome

 
xialj
Occasional Contributor

a question about HP Smart Array ON hp superdome

One partition of my hp superdome is preinstalled with win2003sp1 for ia64, and i reinstalled it with hpux1131, but i found there is only on disk in hpux(in fact there are two of physical disk). i think it HP Smart Array 6400-128 Controller has configured the two disk with mirror.
I want to break the mirror and with two disk to work, but it does not work when i press ESC+8/F8 at the startup process with the following line:HP Smart Array 6400-128 Controller

how can i do ? thank you every one.
3 REPLIES 3
Luk Vandenbussche
Honored Contributor

Re: a question about HP Smart Array ON hp superdome

You think it is an Smart-Array 6400-128.

Please can you double check the exact partnumber of this card
Steven E. Protter
Exalted Contributor

Re: a question about HP Smart Array ON hp superdome

Shalom,

When you have a smart array card and configure it for raid the OS only sees one disk.

SEP
Steven E Protter
Owner of ISN Corporation
http://isnamerica.com
http://hpuxconsulting.com
Sponsor: http://hpux.ws
Twitter: http://twitter.com/hpuxlinux
Founder http://newdatacloud.com
Torsten.
Acclaimed Contributor

Re: a question about HP Smart Array ON hp superdome

See the manual also:

http://docs.hp.com/en/J6369-90044/index.html

http://docs.hp.com/en/J6369-90039/index.html

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!