A9782A Gigabit teaming

[PSS SYS ADMIN]

Hi everyone,
I have 2 A9782A Gigabit combo card installed in a standalone hpux 11i rp4440 server and I want to configure it in fault tolerance.
Is it possibile? And what do I need? I need to buy some software?

thank for the time you'll spend for me.
Regards...
PSS

[Keith Bryson · Accepted solution]

Hi there

Take a look at:

http://software.hp.com/portal/swdepot/displayProductInfo.do?productNumber=J4240AA

You could actually create a script to monitor one LAN interface and in the event of a failure, switch IPs to another card.

Keith

[Gerhard Roets]

Hi PSS

Look at the HP Product called Auto Port Aggregation aka APA.

As listed above.

Regards
Gerhard

[Sunil Sharma_1]

You have t buy a product called Auto Port Aggregation (APA) product code J4240AA for HPUX 11i.

You can configure this in various mode like failover, load share etc.


http://www.hp.com/products1/serverconnectivity/adapters/apa_infolib.html

Sunil

[Sunil Sharma_1]

http://www.hp.com/products1/serverconnectivity/adapters/apa_overview.html

Sunil