about an error got from dmesg

[Cem Tugrul]

Hi Forum,
i have 2 ux box and they are clustered...
i got an error from one of it when i run dmesg
command says;
Unexpected error from cluster lock query (lock_id=0): Invalid argument

what does it mean?
Thank's to all for kind concern...

[Michael Tully]

This post may be of some assistance.

http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=75245

[Carsten Krege]

The message indicates that SG failed to query the cluster lock disk.

You should check syslog for more messages. In my eyes the most likely problem is that the cluster lock disk has a hardware problem or the cluster lock area on the disk is corrupted.

In the first case, you should also see hourly error messages from SG in syslog and probably also logs in the Hardware Diagnostic and in the second case you need to rerun cmapplyconf to rewrite the cluster lock area.

Carsten

[Cem Tugrul]

Hi Michael &Carsten;

here is my syslog
Aug 11 13:36:50 baan03 vmunix: Unexpected error from cluster lock query (lock_id=0): Invalid argument
Aug 11 13:36:50 baan03 cmcld: Unexpected error from cluster lock query (lock_id=0): Invalid argument
Aug 11 14:38:05 baan03 vmunix: Unexpected error from cluster lock query (lock_id=0): Invalid argument
Aug 11 14:38:05 baan03 cmcld: Unexpected error from cluster lock query (lock_id=0): Invalid argument

What kind of an error that i face to face?
Thank's so much for your kind concern...

[Cem Tugrul]

many thank's...