1833861 Members
2363 Online
110063 Solutions
New Discussion

About the system boot

 
Wang,MinJie
Super Advisor

About the system boot

I've installed HP-UX 10.20 on a J6750 Workstation through network and it doesn't boot
the informatino below is the error:
Stored message buffer up to panic:

System Panic:
B2352B HP-UX (B.10.20) #1: Sun Jun 9 08:03:38 PDT 1996
panic: (display==0xb800, flags==0x0) set_machine_parameters: Unidentified cpu type returned from PDC_MODEL

PC-Offset Stack Trace (read across, most recent is 1st):
0x0022f914 0x0017b914 0x0015b368 0x00192230
End Of Stack
It was not possible for the kernel to find a process
that caused this crash.


Dumpsys() called

WARNING: Early dump not configured; ** contact your HP support representative **
WARNING: Can't initialize dump device

Dumpsys() failed, returned 4294967295
1 REPLY 1
Sameer_Nirmal
Honored Contributor

Re: About the system boot

Hi,

HP-UX 10.20 is not supported on j6750 workstation. The supported HP-UX OS versions are menetioned in this link
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c00193137〈=en&cc=us&taskId=101&prodSeriesId=295892&prodTypeId=12454

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c00193094〈=en&cc=us&taskId=101&prodSeriesId=295892&prodTypeId=12454


The error primarily indicates that the processor inside j6750 is not supported/indentifiable by 10.20 which made it cleared saying 10.20 won't work on this workstation.