activation on second npar on intregrity

[pedliz11]

received from hp a new intergrity and it comes with inap on the server and 1 npar on the expansions chassis.. But according to the parstatus they are 2naprs per cabinet.. How do i
bring up the second npar in the cabinet?

[Geoff Wild · Accepted solution]

With the parmodify command.

See

http://docs.hp.com/en/5991-1247B/ch05s01.html

for more info on booting nPars

Rgds...Geoff

[pedliz11]

i didi a parstatus

[Torsten.]

Based on the information you provided everyone can only suggest this:

Do the appropriate steps to make it!

How about posting some more information like the parstatus etc.

[pedliz11]

parstatus
Note: No action specified. Default behavior is display all.
[Complex]
Complex Name : Complex 1
Complex Capacity
Compute Cabinet (4 cell capable) : 1
IO Expansion Cabinet : 1
Active MP Location : cabinet 0
Original Product Name : server rx8640
Original Serial Number : USE47202EY
Current Product Order Number : AB446A
OEM Manufacturer :
Complex Profile Revision : 1.0
The total number of partitions present : 2


[Cabinet]
Cabinet I/O Bulk Power Backplane
Blowers Fans Supplies Power Boards
OK/ OK/ OK/ OK/
Cab Failed/ Failed/ Failed/ Failed/
Num Cabinet Type N Status N Status N Status N Status MP
=== ============ ========= ========= ========== ============ ======
0 4 cell slot 21/0/N+ 6/0/N+ 6/0/N+ - Active
8 I/O expansio 4/0/N+ 6/0/N+ 2/0/N+ - -

Notes: N+ = There are one or more spare items (fans/power supplies).
N = The number of items meets but does not exceed the need.
N- = There are insufficient items to meet the need.
? = The adequacy of the cooling system/power supplies is unknown.
HO = Housekeeping only; The power is in a standby state.
NA = Not Applicable.


[Cell]
CPU Memory Use
OK/ (GB) Core On
Hardware Actual Deconf/ OK/ Cell Next Par
Location Usage Max Deconf Connected To Capable Boot Num
========== ============ ======= ========= =================== ======= ==== ===
cab0,cell0 Active Core 8/0/8 32.0/0.0 cab0,bay0,chassis0 yes yes 0
cab0,cell1 Active Core 8/0/8 32.0/0.0 cab0,bay0,chassis1 yes yes 1
cab0,cell2 Active Base 8/0/8 32.0/0.0 cab8,bay0,chassis0 yes yes 1
cab0,cell3 Active Base 8/0/8 32.0/0.0 cab8,bay0,chassis1 yes yes 0

Notes: * = Cell has no interleaved memory.


[Chassis]
Core Connected Par
Hardware Location Usage IO To Num
=================== ============ ==== ========== ===
cab0,bay0,chassis0 Active yes cab0,cell0 0
cab0,bay0,chassis1 Active yes cab0,cell1 1
cab8,bay0,chassis0 Active yes cab0,cell2 1
cab8,bay0,chassis1 Active yes cab0,cell3 0


[Partition]
Par # of # of I/O
Num Status Cells Chassis Core cell Partition Name (first 30 chars)
=== ============ ===== ======== ========== ===============================
0 Active 2 2 cab0,cell0 Partition 0 - UX
1 Active 2 2 cab0,cell1 Partition 1 - UX


[Partition - HyperThread]
Par Num Hyperthreading Enabled Hyperthreading Active
======= ====================== =====================
0 no no
1 no no
#

[Torsten.]

Looks like you already have to active partitions. Where exactly is the problem?

[pedliz11]

the problem is interpretation

i have two active npars in the server npar0 and npar1
npar 0 is in the server cabinet
npar1 is in the expansion cabinet

question are each of the cabinets capabile of holding 2 npars thus giving me a total of 4 npars per server?

[Torsten.]

>>
npar 0 is in the server cabinet
npar1 is in the expansion cabinet


No and no no no!

There is only I/O in the expansion box - not a single CPU nor any byte of memory.

The CPUs and memory are in the main cabinet.

Look at this:

cab0,cell0 Active Core 8/0/8 32.0/0.0 cab0,bay0,chassis0 yes yes 0
cab0,cell1 Active Core 8/0/8 32.0/0.0 cab0,bay0,chassis1 yes yes 1
cab0,cell2 Active Base 8/0/8 32.0/0.0 cab8,bay0,chassis0 yes yes 1
cab0,cell3 Active Base 8/0/8 32.0/0.0 cab8,bay0,chassis1 yes yes 0


Each partition has some I/O in the main cabinet, some in the expansion.



Again, where is the problem?

[pedliz11]

thanks torsten you r the man