Add Cells on the Partition (rp7420/HP-UX 11.23 EoE)

[YAQUB_1]

Dear All,

Recently I have upgrade our system (rp7420) one of Cell Board, existing Cell Board 1 & new Cell Board 0 (8 core processor & 16GB memory).

After add on new Cell Board then I have boot the system that time I did not get any new processor & memory.

Here is some out put for your referense:

# ioscan -fnC processor
Class I H/W Path Driver S/W State H/W Type Description
===================================================================
processor 0 1/10 processor CLAIMED PROCESSOR Processor
processor 1 1/11 processor CLAIMED PROCESSOR Processor
processor 2 1/12 processor CLAIMED PROCESSOR Processor
processor 3 1/13 processor CLAIMED PROCESSOR Processor
processor 4 1/14 processor CLAIMED PROCESSOR Processor
processor 5 1/15 processor CLAIMED PROCESSOR Processor
processor 6 1/16 processor CLAIMED PROCESSOR Processor
processor 7 1/17 processor CLAIMED PROCESSOR Processor
# parstatus -C


[Cell]
CPU Memory Use
OK/ (GB) Core On
Hardware Actual Deconf/ OK/ Cell Next Par
Location Usage Max Deconf Connected To Capable Boot Num
========== ============ ======= ========= =================== ======= ==== ===
cab0,cell0 Inactive 8/0/8 16.0/0.0 cab0,bay0,chassis0 no - -
cab0,cell1 Active Core 8/0/8 16.0/0.0 cab0,bay0,chassis1 yes yes 0

Notes: * = Cell has no interleaved memory.
# icod_stat
Software version: B.08.01
System ID: metrica
Serial number: SGH4649H22
Product number: A7025A
Unique ID: Z3e123a535aa39176
System contact e-mail: Not set
From e-mail: Set to the default ('adm')
Asset reporting: on
Temporary capacity warning period: 15 days
Exception status: No exception

Local nPartition Status
-----------------------
Total number of configured cores: 8
Number of Intended Active cores: 8
Number of active cores: 8
Number of inactive cores: 0
Additional cores that can be activated with current usage rights: 0
Number of cores that could be activated with additional usage rights: 0
Number of cores that can be activated with temporary capacity: 0
Number of cores that are deconfigured or attached to inactive cells: 0

Instant Capacity Resource Summary
---------------------------------
Number of cells without usage rights: 0
Number of inactive cells: 1
Amount of memory without usage rights: 0.0 GB
Amount of inactive memory: 16.0 GB
Number of cores without usage rights: 0
Number of inactive cores: 8
Number of cores that must be deactivated (insufficient usage rights): 0
Temporary capacity available: 0 days, 0 hours, 0 minutes

Allocation of Instant Capacity Resources among the nPartitions
--------------------------------------------------------------
Intended Actual
nPar Total Active Active =======Inactive======= Runs
ID Cores Cores Cores Cores Memory Cells iCAP nPar Name
==== ===== ======== ====== ====================== ==== ======================
0 8 8 8 0 0.0 GB 0 Yes Partition 0... (local)
N/A 8 N/A N/A N/A 16.0 GB 1 N/A Unassigned Cells

Could you please any one help me, how I can resolve this issue.

Rgds -- Yaqub

[Eric SAUBIGNAC]

Bonjour Yaqub,



This is normal.

Have a look at output of parstatus -C :



Have a look at output of icod_stat :



That means that you must modify your nPar in order to add the cell and its components.

2 ways to do that :

- with SMH. Connect with your browser to http://metrica:2301 , select "Tools" then "View and Manage Complex" in the " nPartition Management " box.

- under shell with command parmodify.

If you are not familiar with nPar, i strongly suggest the use of SMH.

Regards

Eric

[YAQUB_1]

Hello Eric,

Thanks for your reply.

I have try to SMH way, but I am failed. BTW, could you please guide to nPartition CLI mode, I think so I will be do that as per your instraction.

Please help me regarding this issue.

Rgds -- Yaqub

[Eric SAUBIGNAC · Accepted solution]

I have no cell hardware to control the commands, but I guess that :

# parmodify -p 0 -a 0/0
# shutdown -R 0

would be the correct steps to follow. You will need to have console access to supervise reboot as "-R" in shutdown means "Shut down the system to a ready-to-reconfigure state and reboot if possible."

Eric

[YAQUB_1]

Hello Eric,

Thank you very much for your contribution regarding this issue.

Before send you above command, I have execute this command (parmodify -p 0 -a 0:base:y:ri) after execute this command then I will power recycle entire system. Then I got 16 processor & 32 GB memory.

BTW, thank you very much for your cooperation & support. I hope in future you get same effort us.

Best Regards,
Mohammad Yaqub
HP-CSA, AIS & APS