Adding Font

[Manolo Marzan]

We have a barcode DIMM installed in our 8150DN printer but the barcode is too big for our label.
Is it possible to add a new font (smaller barcode font) in HP UNIX Workstation or HPLJ and use this to print?

[Graham Cameron_1]

I think you need to refer to your printer documentation or your supplier.
The barcode printing is likely to be highly device specific. and completely independent of your HP-UX fonts.

-- Graham

[Manolo Marzan]

Is there a way where I can install the TTF font directy to the Printer? any HPLJ printer 4000 series, 5000 series, etc.

[John Carr_2]

manolo

[John Carr_2]

manolo

you would be wise to raise this on the printer section of the forum it will get far more attention from the right people

http://forums1.itrc.hp.com/service/forums/familyhome.do?familyId=218

:-) John.

[Graham Cameron_1]

Sorry. Hadn't realised this was an HP printer with PCL support.
Try here.

http://docs.hp.com/cgi-bin/fsearch/framedisplay?top=/hpux/onlinedocs/5187-2216/5187-2216_top.html&con=/hpux/onlinedocs/5187-2216/00/00/22-con.html&toc=/hpux/onlinedocs/5187-2216/00/00/22-toc.html&searchterms=pcl&queryid=20031218-021046

-- Graham

[Manolo Marzan]

Hi John,

Thanks because this is an urgent requirement to print barcode for HP-China warrantly card. I'll be using this in HP-Singapore MFG BoxLabel stations.