auto-reboot on 11.0

[someone_4]

Hey everyone
we one of our A-500 severs had a NIC card go bad. So as you might know we had to replace the whole board. What a shame having to replace the whole mother board because of one little NIC card. We anyways when we booted up the would not give us the 10 sec to stop boot process ... promt. We had to manualy tell it to boot from the primary disk. The HP guy didnt know where to set the auto boot setting. So here I am. Where do you set the auto boot on 11.0?

Thanks
Richard

[Tom Geudens]

Hi,
man setboot
might help ...
You can also do this in the pdc

Tom

[James R. Ferguson · Accepted solution]

Hi Richard:

Have a look at the man pages for 'setboot'.

# setboot -b on

Regards!

...JRF...

[S.K. Chan]

# setboot -b on|off

[Tom Geudens]

Hi again :-),
In the PDC it works as follows :
Main Menu: Enter command or menu > co
Configuration Menu: Enter command >AU BO ON

Tom