Backup failed..

[Navin_3]

Hi team,

I am getting the followiong error.

root@holland>tail -f incr-log.1002
fbackup(3044): ioctl error, can't query outfile
at media record 35539
fbackup(3102): attempting to make this volume salvagable
fbackup(3123): could not read the previous checkpoint record
fbackup(3105): writing 2 EOFs and rewinding the tape
fbackup(3106): please mount a good tape
fbackup(3040): output file /dev/rmt/0m encountered an I/O error
fbackup(3019): would you like to enter a new output file?
fbackup(3004): writer aborting
fbackup(1002): Backup did not complete : Reader or Writer process exit

I tried changing the tapes also. Can anyone give me a solution.

[bhavin asokan]

hi,

have you tried cleaning of tape drive.
you can check drive with other type of backups like tar.


regds,

[Paul_481]

Hi Navin,

Check out this link.

http://forums1.itrc.hp.com/service/forums/questionanswer.do?admit=716493758+1108100179795+28353475&threadId=28572

Regards,
Paul

[James George_1]

Hi

check a different tape. If it doesn't work, it looks like your drive is faulty. Might need a drive replacement.

Try
# mt -t /dev/rmt/0m staus and the

# mt -t /dev/rmt/0m offl commands with the tape inside and see how it works.

Good Luck

James George

[Navin_3]

when i do a "mt status, mt rewind , mt offline" everything is working. Even if do 1MB backup it's working.

Pls find the output of ioscan -funC tape

root@germany>ioscan -funC tape
Class I H/W Path Driver S/W State H/W Type Description
=====================================================================
tape 1 0/0/1/0.1.0 stape NO_HW DEVICE HP C1537A
/dev/rmt/1mb /dev/rmt/c0t1d0BESTnb
/dev/rmt/1mn /dev/rmt/c0t1d0DDS
/dev/rmt/1mnb /dev/rmt/c0t1d0DDSb
/dev/rmt/c0t1d0BEST /dev/rmt/c0t1d0DDSn
/dev/rmt/c0t1d0BESTb /dev/rmt/c0t1d0DDSnb
/dev/rmt/c0t1d0BESTn
tape 0 0/0/1/0.3.0 stape CLAIMED DEVICE HP C1537A
/dev/rmt/0m /dev/rmt/c0t3d0BESTn
/dev/rmt/0mb /dev/rmt/c0t3d0BESTnb
/dev/rmt/0mn /dev/rmt/c0t3d0DDS
/dev/rmt/0mnb /dev/rmt/c0t3d0DDSb
/dev/rmt/c0t3d0BEST /dev/rmt/c0t3d0DDSn
/dev/rmt/c0t3d0BESTb /dev/rmt/c0t3d0DDSnb


Is other any other solution other than repalcing the drive.

[bhavin asokan]

hi,

your output shows that 1mn is not getting detected.but 0mn is claimed.
but it is old output

can you post the output of
ioscan -fnC tape

(note:don't use u option)

regds,

[Navin_3]

Bhavin,

Pls find the output below.

root@germany>ioscan -fnC tape
Class I H/W Path Driver S/W State H/W Type Description
=====================================================================
tape 1 0/0/1/0.1.0 stape NO_HW DEVICE HP C1537A
/dev/rmt/1mb /dev/rmt/c0t1d0BESTnb
/dev/rmt/1mn /dev/rmt/c0t1d0DDS
/dev/rmt/1mnb /dev/rmt/c0t1d0DDSb
/dev/rmt/c0t1d0BEST /dev/rmt/c0t1d0DDSn
/dev/rmt/c0t1d0BESTb /dev/rmt/c0t1d0DDSnb
/dev/rmt/c0t1d0BESTn
tape 0 0/0/1/0.3.0 stape CLAIMED DEVICE HP C1537A
/dev/rmt/0m /dev/rmt/c0t3d0BESTn
/dev/rmt/0mb /dev/rmt/c0t3d0BESTnb
/dev/rmt/0mn /dev/rmt/c0t3d0DDS
/dev/rmt/0mnb /dev/rmt/c0t3d0DDSb
/dev/rmt/c0t3d0BEST /dev/rmt/c0t3d0DDSn
/dev/rmt/c0t3d0BESTb /dev/rmt/c0t3d0DDSnb
root@germany>ioscan -f /dev/rmt/0m
Class I H/W Path Driver S/W State H/W Type Description
=====================================================================
tape 0 0/0/1/0.3.0 stape CLAIMED DEVICE HP C1537A

[bhavin asokan]

hi,

can you try with tar backup.

regds,

[Navin_3]

I have fired a tar backup. Lets wait & see.

[Bill Hassell]

fbackup/frecover have MANY features to ensure accrate storage and recovery, especially when there are tapwe errors. The fact that short backups and restores work OK definitely indicate a tape drive problem. It is not a hard failure, but one where the drive errors are not getting detected. tar has nothing to recover from tape errors and only minimum data integrity tests. You can download TapeTools and use that to test your drive, but with online diagnostics and EMS loaded, your syslog should be full of tape error messages. Without EMS/diags, your server is not going to be dependable. Get TapeTools from http://h18006.www1.hp.com/products/storageworks/ltt/

[Navin_3]

When i try to install the Hp_tape_tool, it's giving the following error. Can anyone help me out to successfully install the tapedrive_tool.

sh install_hpltt
Installing HP Library and Tape Tools...

Install requires approximately 10MB of free space under /opt
Beginning swinstall process of HP_LTT to /opt/ltt/

======= 02/14/05 00:39:40 EST BEGIN swinstall SESSION
(non-interactive) (jobid=germany-0073)

* Session started for user "root@germany".

* Beginning Selection
* Target connection succeeded for "germany:/".
ERROR: "germany:/admin/HP_LTT35.depot": You do not have the required
permissions to perform this operation. Check permissions
using the "swacl" command or see your system administrator for
assistance. Or, to manage applications designed and packaged
for nonprivileged mode, see the "run_as_superuser" option in
the "sd" man page.
* Source connection failed for "germany:/admin/HP_LTT35.depot".
WARNING: More information may be found in the daemon logfile on this
target (default location is germany:/var/adm/sw/swagentd.log).
* Selection had errors.



======= 02/14/05 00:39:43 EST END swinstall SESSION (non-interactive)
(jobid=germany-0073)

[Bill Hassell]

It looks like you recently changed the hostname and/or IP address or LAN card on this system. Stop and restart swagentd:

/sbin/init.d/swagentd stop
/sbin/init.d/swagentd start

and that should fix the problem. This is not unique to TapeTools...installing any HP software using swinstall (applications, patches, etc) would give you the same error.