Bannerpage on printers

[CPHVF-U Guard]

Hi
I have to configure bannerpage set to on, on some printers. I know I can modify the model script in/etc/lp/interface/model.orig/"printer"
"printer" to paper="ISOA4", but I cant't figure out where ?

Kind Regards

[Chris Wilshaw]

I think you should just be able to change the line

paper="def"

to change the default paper type.

To enable banner pages, the printer file in /etc/lp/interface needs to contain the line

banner="yes";

(this may be currently set to

banner="";

[Steve Steel]

Hi

use the jetadmin or hppi tool to do it.

Example hppi

./hppi

****************************************************************
*****] ****
**** ] **** JetDirect Printer Installer for UNIX
**** ]]]]] ]]]]] **** Version E.10.18
**** ] ] ] ] ****
**** ] ] ]]]]] **** M A I N M E N U
***** ] ****
****** ] **** User: (root) OS: (HP-UX B.10.20)
I N V E N T
****************************************************************

1) Spooler Administration (super-user only)


2) JetDirect Configuration (super-user only)
- TCP/IP configurable parameters

3) Diagnostics:
- diagnose printing problems


?) Help q) Quit

Please enter a selection (q - quit): 1

****************************************************************
*****] ****
**** ] **** JetDirect Printer Installer for UNIX
**** ]]]]] ]]]]] **** Version E.10.18
**** ] ] ] ] ****
**** ] ] ]]]]] **** Spooler Administration
***** ] ****
****** ] **** User: (root) OS: (HP-UX B.10.20)
I N V E N T
****************************************************************

Spooler:
1) Add printer to local spooler
2) Delete printer from local spooler
3) Modify existing spooler queue(s)
4) Install New Model Script
5) Remove Model Script

?) Help q) Quit

Please enter selection: 3

Currently configured HP network print queues:
-----------------------------------------------
belgo046 belgo138 tester tester046


Enter the lp destination name (q - quit): belgo138

Modifiable Queue Parameters
-----------------------------
Settings may be changed by selecting the corresponding numbers. You
can make as many changes as you want until '0' is selected.
To abort the operation, press 'q'.

Warning: Modifying a queue while printing a job may cause the job to
be cancelled and re-started again.


Options: Current Settings:
-------- -----------------
1) Default Queue [YES]
2) Status Log [OFF]
3) Additional printer changes . . .

Modelscript used for this queue is net_lj4x

Select an item for change, or '0' to make the changes effective (q - quit): 3

Modifiable Printer Parameters
-----------------------------
Settings may be changed by selecting the corresponding numbers. You
can make as many changes as you want until 'q' is selected.


Options: Current Settings:
-------- -----------------
1) Job Recovery [ON]
2) True End-of-Job [OFF]
3) Banner Page [ON]
4) Default Printing Language [AUTO]
5) PostScript Level [Level 1]

Select an item for change, or q when done:



Steve Steel