Boot 9000 via iSCSI

[Mark Landin]

Did HP ever release a hardware iSCSI initiator for their 9000 systems, specifically the A500 (rp2450) systems?

I know there's a software initiator, but call me old-fashioned .. I like hardware initiators.

[melvyn burnard]

perhaps the documents for iSCSI here might help:
http://docs.hp.com/en/hpux11iv2.html
specifically
http://docs.hp.com/en/T1452-90011/T1452-90011.pdf
(roughly halfway down)

[Mark Landin]

As all documents on the cited page refer to the software iSCSI initiator, am I to infer that there is no hardware iSCSI initiator support or availability for HP-UX 11 on the rp24xx platforms because there are no documentation sets for it?

If so, simply stating "no support, sorry" would have sufficed.

[rick jones]

No, I can not recall HP ever offering a hardware-based iSCSI initiator for the RP24XX's. I'm not sure a hardware-based iSCSI initiator has been (or perhaps will be) released for any HP 9000's, and I'm not sure there is one yet for the HP Integrity servers either. That would require either a big honking set of EFI (?) firmware or a card with TOE/rNIC support and I don't think we've announced anything in that area yet.

[marie-noelle jeanson]

Hi all,

I can confirm, HP has not released an iSCSI hardware initiator product for any HP9000 servers.

Marie.