Boot from SAN ( configuration steps needed )

[JAIKISHAN_2]

Hi,
I need the configuration steps to do the fresh installation of HPUX server to boot from EMC clariion CX-500/CX-700 ( SAN )

HP9000-rp3440-04
HP-UX 11i ( 11.11 )
HBA-PCI-X = A9782A --Driver = 11.11.02
Firmware Rev : ROM 3.2.168 , ROM 3.2.170

I would really appreciate if someone throws light on the same...
Rgds
Jai
Edited to comply with ITRC Guidelines

[D Block 2]

Try emc's powerlink, documentation:
https://powerlink.emc.com/MediumFreq/300-000-614_a06_elccnt_0.pdf


Try getting an acct on: powerlink.emc.com
and also search: docs.hp.com