Boot Information

[Filosofo]

Hello,
I have ISL> prompt.
What are the command that I execute to continue the boot proces?

Filo

[Pete Randall]

hpux


Pete

[Michael Steele_2]

ISL>hpux

-or-

ISL>hpux /stand/vmunix

[Patrick Wallek]

You can try either:

ISL> bo pri

or

ISL> hpux

[Jeff Schussele · Accepted solution]

Hi Filo,

As Pete stated
hpux

But if you have a mirrored boot/root disk set & one is bad you'd need
hpux -lq

If you want single user mode
hpux -is

If you want LVM maint mode
hpux -lm

HTH,
Jeff

[Helen French]

For normal boot:

ISL > hpux

If you want to boot in single user mode, give 'hpux -is'. Also type "help" for available commands and it's usage.

[Zafar A. Mohammed_1]

all the above commands are correct and if you need more then check this link chapter#5 Section Booting Systems.

http://docs.hp.com/hpux/pdf/B2355-90742.pdf

Thanks
Zafar

[Pete Randall]

See, that's why Jeff's answer is better than mine. I went for the short and sweet, Jeff is comprehensive and informative!

;^)

Pete