Boot Problem

[joe_91]

When i try to boot it says

/stand/vmunix cannot open ; not executable

from ISL i cannot do hpux ll /

it gives back the same

/stand/vmunix cannot open ; not executable

Any way to get around with this?

Thanks

Joe

[Pete Randall]

try booting with /stand/vmunix.prev


Pete

[opronin]

if LIF has been corruped - you have to use thre recovery CD/DVD to recover...

[Mridul Shrivastava]

Refer the following link:

http://docs.hp.com/en/B2355-90772/ch11s13.html

This is Expert Recovery Using the Core Media.
Please look into the section "Rebuilding the bootlif and Installing Critical Files " and follow the step by step procedure.. only copying bootlif should work in our case, else you may try other steps as well..

[Fabian Briseño]

Hey Joe.

If all else fails, you could try an ignite backup recovery.

[Raj D.]

Joe,

-what is the os version you are using.

-Did you change anything before rebooting the box.

- try booting from recovery shell and see if you have any good kernel to boot from, also crun mkboot on your pri disk.

-if you have created ignite recovery tape , you can use after trying all the options.

hth,
Raj.

[dipesh_2]

boot the machine in single user mode. & boot with the alternate kernel