HPE Community
Operating System - HP-UX
1826415 Members
3942 Online
109692 Solutions
New Discussion

Re: Booting from an external RAID via FC

 
DECOSTER
Occasional Contributor

‎01-16-2002 01:33 AM

‎01-16-2002 01:33 AM

Booting from an external RAID via FC

Can anyone explain to me why a B2600 Workstation cannot boot from an external RAID connected via an A5158A interface, while f.i. an A500 can ?
0 Kudos
Reply
1 REPLY 1
Stefan Farrelly
Honored Contributor

‎01-16-2002 01:46 AM

‎01-16-2002 01:46 AM

Re: Booting from an external RAID via FC


Probably something to do with the firmware and how long a timeout is programmed into it to detect for a bootable device. The B class is different from the A class.

Actually, im not even sure either of your attempts to boot off a fibre disk are supported by HP. You sure the B and A are supported booting off a fibre card ? Normally amount of time taken to do an ioscan down a fibre channel are longer than on a SCSI connected device and for booting you need a really quick response.

Im from Palmerston North, New Zealand, but somehow ended up in London...
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.