bootsys errors

[SSS_4]

Hi Experts,

I am invoking "bootsys -w -v " from my ignite server to a client & it's not going through. Getting too many errors. I have attached the errors in the form of a notepad file, could U guyes pl go through it & rescue me

Thanks in Advance
SSP

[Sanjay_6]

Hi,

If you are using a rp8400 server with a A7109A core IO Card, read on,

http://www1.itrc.hp.com/service/cki/docDisplay.do?docLocale=en_US&docId=200000079991929

The ITRC doc id is KBRC00014674.

Hope this helps.

regds

[SSS_4]

Hi sanjay, Ignite Server is rp3440 & the client is N-4000-36.

Will that Work?

SSS

[A. Clay Stephenson]

Best guess is that you are not using the built-in LAN card.

[SSS_4]

HI Clay,

But how do I make sure that I am using the built-in lan interface. Find below ioscan output & am using lan5 NIC.

farmman2:/opt/ignite/bin# lanscan
Hardware Station Crd Hdw Net-Interface NM MAC HP-DLPI DLPI
Path Address In# State NamePPA ID Type Support Mjr#
0/0/0/0 0x0010837C9270 0 UP lan0 snap0 1 ETHER Yes 119
1/4/0/0 0x00306E94E9B6 5 UP lan5 snap5 6 ETHER Yes 119
LinkAgg0 0x001083189AF2 100 UP lan100 snap100 8 ETHER Yes 119
LinkAgg1 0x000000000000 101 DOWN lan101 snap101 9 ETHER Yes 119
LinkAgg2 0x000000000000 102 DOWN lan102 snap102 10 ETHER Yes 119
LinkAgg3 0x000000000000 103 DOWN lan103 snap103 11 ETHER Yes 119
LinkAgg4 0x000000000000 104 DOWN lan104 snap104 12 ETHER Yes 119

[Sanjay_6]

Hi,

Looks like the Ethernet port @ 0/0/0/0 is the built-in port that you should be using.

Take a look at page 113 of this PDF.

http://docs.hp.com/en/3687/rp7400_customer_hardwaremanual.pdf

Hope this helps.

regds

[SSS_4]

Hi Sanjay,

Now I am getting the attached errors, any clues?

I think it is failed to obtain the correct ip address though I have updated /etc/bootptab and instl_boottab files and also "instl_adm -d" . Pl help .

[SSS_4]

Hi Sanjay,

I am sorry , the correct attachment is this.


SSS

[Sivakumar TS]

Hi,

Looks like a network congetion...

Could you check the syslog in the IUX server, also do a ping to the IUX server and check if there is any packet loss.

Regards,

Siva.

[Sivakumar TS]

Also do a netstat in the server and check for any errors ( tcp/udp )

Siva.

[Asif Sharif]

http://docs.hp.com/en/B2355-90110/ch06s08.html