Bus, Dev & Ftn numbers

[Firmenich support]

We have a 4 node HP-UX VM Host cluster hosting HP IVM 2.0 guests. For one of the VM Guests we have around 15 VxVM volumes assigned as storage. We found that the Bus, Dev 7 Ftn numbers are different. For one host it is
Node1:
Bus Dev Ftn ctrl tgt lun
0 4 0 0 0 1

Node2:
Bus Dev Ftn ctrl tgt lun
0 1 0 0 0 1

Node3:
Bus Dev Ftn ctrl tgt lun
4 0 0 0 0 1

Due to the above we have different disk id's and this causes the VM Guest failover to have different disk id's. Is there a possibility to modify the VM guest to have same Bus, Dev & Ftn numbers.

[Tim Nelson]

You should be able to reassign the HW addresses from the Host to the Guest.

You'll then have to figure out how to import the new devs into VxVM ( It would be easy with LVM )...