Can not go into the Configurable Kernel by using sam

[Sun Kevin]

Hi, all,

I have a problem on going into the configurable kernel parameters selection by
using sam

I run the sam and following the menu to go to kernel parameters after that I
hit an error the can not go in.

System prompted me to check the samlog file. After checking samlog file, found
sth as bellow:

Fri Jan 28 16:45:03 2000 Entering SAM area "Kernel Configuration (dclass)".
@!@16@949052703@0
Syntax Error: /usr/sam/lib/kc/kc.da at line 1: Location: da_parse:656 Err
or Code: 7159
@!@129@949052704@0
Fri Jan 28 16:45:04 2000 Exiting SAM area "Kernel Configuration (dclass)".
@!@129@949052710@0
Fri Jan 28 16:45:10 2000 Entering SAM area "Kernel Configuration (dclass)".
@!@16@949052710@0
Syntax Error: /usr/sam/lib/kc/kc.da at line 1: Location: da_parse:656 Err
or Code: 7159
@!@129@949052711@0
Fri Jan 28 16:45:11 2000 Exiting SAM area "Kernel Configuration (dclass)".
@!@129@949052738@0
Fri Jan 28 16:45:38 2000 Entering SAM area "Kernel Configuration (dclass)".
@!@16@949052738@0
Syntax Error: /usr/sam/lib/kc/kc.da at line 1: Location: da_parse:656 Err
or Code: 7159
@!@129@949052739@0
Fri Jan 28 16:45:39 2000 Exiting SAM area "Kernel Configuration (dclass)".
@!@129@949052760@0
Fri Jan 28 16:46:00 2000 Entering SAM area "Kernel Configuration (dclass)".
@!@16@949052760@0
Syntax Error: /usr/sam/lib/kc/kc.da at line 1: Location: da_parse:656 Err
or Code: 7159
@!@129@949052766@0
Fri Jan 28 16:46:06 2000 Exiting SAM area "Kernel Configuration (dclass)".
@!@4@949054349@0
ioparser.sh: Executing the following command:\Cinsf > /dev/null 2>&1\Cto bind
devices to Card Instance numbers.
@!@4@949054349@0
ioparser.sh: Determine if ioscan is to be run. If ioscan is not run at this
time use previous ioscan output cached in $IOSCAN_OUT.
@!@4@949054349@0
ioparser.sh: Executing the following command:\Cioscan $* > $IOSCAN_OUT\C
@!@129@949054460@0
Fri Jan 28 17:14:20 2000 Entering SAM area "System Administration Manager (dc
lass)".
@!@8@949054460@0
Entering Task Manager with task FAL_IS_MUL_SAMS.
@!@4@949054460@0



Please help. Thanks

[Dan Hull]

Try running this command to hopefully fix the error:

# swconfig \*

[Ben Bout]

Try :
1. swconfig \*
After doing 1. please try going to SAM again.
If 1. does not work, please try 2. If 1 works, DON'T try 2.
2. cp /usr/newconfig/etc/sam/reg* /etc/sam
ok good luck.