cannot boot from primary path (system panic)

[yulianto piyut]

hi,

i already replace boot disk (primary disk).before do that, i have reduce all logical volume and remove disk form vg00, than i mirror this new disk.

root:/>lvreduce -m 0 /dev/vg00/lvol1 /dev/dsk/c4t6d0
root:/>lvreduce -m 0 /dev/vg00/lvol2 /dev/dsk/c4t6d0
root:/>lvreduce -m 0 /dev/vg00/lvol3 /dev/dsk/c4t6d0
root:/>lvreduce -m 0 /dev/vg00/lvol4 /dev/dsk/c4t6d0
root:/>lvreduce -m 0 /dev/vg00/lvol5 /dev/dsk/c4t6d0
root:/>lvreduce -m 0 /dev/vg00/lvol6 /dev/dsk/c4t6d0
root:/>lvreduce -m 0 /dev/vg00/lvol7 /dev/dsk/c4t6d0
root:/>lvreduce -m 0 /dev/vg00/lvol8 /dev/dsk/c4t6d0
root:/>lvreduce -m 0 /dev/vg00/lvol9 /dev/dsk/c4t6d0
root:/>vgreduce /dev/vg00 /dev/dsk/c4t6d0

than unpluged disk. after that, insert new disk and make mirror.
than make boot area in new disk
# mkboot /dev/dsk/c4t6d0
# mkboot -a "hpux (;0)/stand/vmunix" /dev/rdsk/c4t6d0
# lvlnboot -R /dev/vg00
# lvlnboot -v
# shutdown -ry 0

system can't be up and make system panic
System Panic:

linkstamp: Wed May 31 16:02:19 wib 2006
_release_version: @(#) $Revision: vmunix: vw: -proj selectors: CUPI80_BL2000_1108 -c 'Vw for CUPI80_BL2000_1108 build' -- cupi80_bl2000_1108 'CUPI80_BL2000_1108' Wed Nov 8 19:24:56 PST 2000 $
panic: Data page fault



*** A system crash has occurred. (See the above messages for details.)
*** The system is now preparing to dump physical memory to disk, for use
*** in debugging the crash.

ERROR: Your system crashed before I/O and dump configuration was complete.
A crash dump cannot be taken under these circumstances without
special configuration. Contact your HP support representative.


give me solutions, plz!!

[Miguel Hernández]

Hi:

Is a Integrity Server??

Greetings

[yulianto piyut]

closed!