cannot install hpux os from CD on hpux server link to dummy terminal

[combat_2]

I have difficulties in installing hpux os from CD. I do several steps as follow: I type the command:sea
bo p1 after scan boot device path on CD.

I do a bo /0/0/2/1.2.0 also CD hardware path also cannot install. Error message: LED STATE BOOT FAILED. RUNNING NON-OS CODE.NON-CRITICAL ERROR DETECTED. cHK chassis console logs for error messages. Please help. Please provide me correct steps of installing hpux os from CD. Thanks.

[Devender Khatana]

Hi,

Which media are you installing from? It should be HPUx (Install and core OS).

Also instead of sea try "sea IPL" at boot ptompt. It could be due to bad CD/DVD ROM as well.

What is the OS version and hardware?

HTH,
Devender

[baiju_3]

First see the chasis log and alert log from console .This will clear the attaention status .Now if possible request you to do a full poower recycle , disconnect i/p power of the server and power it on again.

Now interrupt the autoboot process execute sea command find out the path for cd rom

you can boot by

bo p0 --auuming p0 is for cdrom .


If still it does not boot check your media and then the CD/DVD drive and proceed.


thx,
BL.