Operating System - HP-UX
1833777 Members
2213 Online
110063 Solutions
New Discussion

Re: Cant install vpar from ignite

 
SOLVED
Go to solution
Turgay Cavdar
Honored Contributor

Cant install vpar from ignite

I setup an ignite server and copy hp-ux 11.31 cd's on the ignite from the ignite GUI. Then i copied virtual partitions (v.5) software on the same depot. On the ignite server i can see Virtual partitions is installed on the server:
server:/#swlist -l product @ /var/opt/ignite/depots/Rel_B.11.31/core | grep VirtualPartition
VirtualPartition A.05.01.03 HP-UX Virtual Partitions Functionality

When i boot vpar and try to install from ignite, in the software field there is no Virtual Partition software, and if i continue after installation server cant boot because i didnt install the virtual partition software. With same way i can install hp-ux 11.23 from another depot because i during the installation i can see and mark VitualPartition software? Do i miss something?
3 REPLIES 3
AwadheshPandey
Honored Contributor

Re: Cant install vpar from ignite

http://docs.hp.com/en/T1335-90018/ch04s04.html
It's kind of fun to do the impossible
Torsten.
Acclaimed Contributor
Solution

Re: Cant install vpar from ignite

I would expect to see the T1335CC product in swlist. Did you copy the correct (and full) bundle?

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Turgay Cavdar
Honored Contributor

Re: Cant install vpar from ignite

i solved the problem after runnig make_config command, now i can see the software.