cclogd

[AUJ]

I have N-class with 4 CPU running, but this chassis code logging daemon (cclogd) used high percentage of the CPU then I try to I search in ITRC
technical knowledge base and the recommendation to resolve the issue is to install patch PHSS_24044. But when I check my system, the patched is
installed already. And I compare this server to my other N-class server but haven't this problem. Does anyone encounter this kind of problem? Appreciate your help!
Regards,AUJ

[Juan Manuel López · Accepted solution]

Type this to check if you have the patch instaled:
swlist -l fileset -a state | grep 24044
The exit is like this:
# PHSS_24044
PHSS_24044.STM-CATALOGS configured
PHSS_24044.STM-MAN configured
PHSS_24044.STM-SHLIBS configured
PHSS_24044.STM-UUT-RUN configured

The problem is that cclogd take one CPU 100 % all the time, is this your case ?
If not, you have other problem. Use top to check see your process on machine.
I hope this help you.

Juanma.

[AUJ]

Hi!

Thanks for your immediate response.I checked the state of the fileset and found out that STM-UUT-RUN was corrupted. I'll try to re-install this patch again and check if the problem will be resolved. I'll just give you points later on.

Rgds,
AUJ