1847245 Members
2591 Online
110263 Solutions
New Discussion

CDE(don't excute)

 
KCS_1
Respected Contributor

CDE(don't excute)

hi, all forum members

I running (hpux)10.20 on D270,but I didn't get it CDE screen when i connected to try it between host(D270) and my pc.
during connecting,never can see CDE's anything process to connect for host that blue screen and login screen,etc.
The server already installed which CDE software and running daemons which called dtlogin,xfs in D270.

how to get I CDE screen?

help me~~


Easy going at all.
5 REPLIES 5
Michael Tully
Honored Contributor

Re: CDE(don't excute)

Are you sure that the CDE processes are running?

# /sbin/init.d/dtlogin.rc stop
# /sbin.init.d/dtlogin.rc start

Check the processes are running.
# ps -ef | grep dt
root 1312 1293 0 Sep 1 ? 0:00 /usr/dt/bin/dtlogin
root 1293 1 0 Sep 1 ? 0:00 /sbin/sh /usr/dt/bin/dtrc
root 29238 28780 0 14:58:02 pts/td 0:00 grep dt

If they are running, then one would assume that your PC X based software is not configured properly. What X based software are you attempting to use?
Anyone for a Mutiny ?
KCS_1
Respected Contributor

Re: CDE(don't excute)

hi,Tully

The PC-base software name is Xmanager(www.netsarang.com)
Also, they(process) are all running that you were say to me.could u please give me any solution??
Easy going at all.
Michael Tully
Honored Contributor

Re: CDE(don't excute)

With your x-display, do you have it configured it properly?

You might like to try:

XDMCP-query - Make sure that you have the IP address correct.
Make sure that you have the display number correct '0'
Make sure that you don't have any restrictions for connections to your system.
Anyone for a Mutiny ?
KCS_1
Respected Contributor

Re: CDE(don't excute)

Hi,

I tried to each mode that (4 mode)indirect, direct, braodcast,XDM passive and got a result that found out my hostname of host and re-try it contiueously,of course ip_address was set correctly.
The software is have I used ,recently.

what do I check part of server?

thanks for your help!! Tully.
have a nice day~~
Easy going at all.
Dirk Wiedemann
Respected Contributor

Re: CDE(don't excute)

Hello Patrick,

have a look at this FAQ on the netsarang web page: http://www.netsarang.com/bbs/viewfaq.html?id=faq&seqnum=1&thread=Z&page=1&total=14
Try the font server.
Also check on your HP-UX server the lookup for your pc-name (forward an reverse). If necessary add your pc name and ip to the /etc/hosts file.

regards
Dirk