cell - cpu showing "deconf"

[eldolan]

Hi pople,

I have this cell that shows 2 cpus as "deconf". I already checked frame mp logs, syslog, cstm but couldn't get to the root cause as to why they're showing in that state.

I would like to know if someone would point to some direction or give me some ideas to get to the source of this.

This an rx7640

This is parstatus output:

[Cell]
                        CPU     Memory                                Use
                        OK/     (GB)                          Core    On
Hardware   Actual       Deconf/ OK/                           Cell    Next Par
Location   Usage        Max     Deconf    Connected To        Capable Boot Num
========== ============ ======= ========= =================== ======= ==== ===
cab0,cell0 Active Base  8/0/8   32.0/0.0  cab0,bay0,chassis0  yes     yes  0   
cab0,cell1 Active Core  6/2/8   32.0/0.0  cab0,bay0,chassis1  yes     yes  0   

Notes: * = Cell has no interleaved memory.


[Chassis]
                                 Core Connected  Par
Hardware Location   Usage        IO   To         Num
=================== ============ ==== ========== ===
cab0,bay0,chassis0  Active       yes  cab0,cell0 0                             
cab0,bay0,chassis1  Active       yes  cab0,cell1 0                             


[Partition]
Par              # of  # of I/O
Num Status       Cells Chassis  Core cell  Partition Name (first 30 chars)
=== ============ ===== ======== ========== ===============================
0   Active       2     2        cab0,cell1 Partition 0 - UX

Thanks for the help&time!

[Torsten.]

Let's start with

# icapstatus

# echo "selclass qualifier cpu;info;wait;il"|/usr/sbin/cstm

# machinfo

in case you run 11.31:

# /opt/propplus/bin/cprop -detail -c "Processors"