change address

[juno2]

how to change the network card ip address of HP UX 10.2 ? thx

[Paddy_1]

use the "ifconfig" command
if you say ifconfig then it will set to the desired ip

[KCS_1]

Hi,

you can make to change your machine's ip address under like that.

1)

# set_parms ip_address

2)
# edit /etc/rc.config.d/netconf


# /sbin/init.d/net stop{start}

[Zafar A. Mohammed_1 · Accepted solution]

Juno,

Check these links
http://forums.itrc.hp.com/cm/QuestionAnswer/1,,0xdc2ec4c76f92d611abdb0090277a778c,00.html

http://forums.itrc.hp.com/cm/QuestionAnswer/1,,0x4f74abe92dabd5118ff10090279cd0f9,00.html

Thanks
Zafar

[Rita C Workman]

If you choose to just edit files, please remember that after you change your ~netconf file you must also change your /etc/hosts file !!!!

And if your new IP has changed the subnet...ensure that your default gateway is correct as well (again in both files ~netconf & hosts).

Just a quick thought,
Rita

[Sudhakar_5]

Hi,

Best way would be thru set_parms ip_address,this will guide to u to modify the ip of the system.U can change it even thru sam->netwrkg&comm->NIC and then select particular nic and goto actions-->modify...

Verify /etc/rc.config.d/netconf file.After that either u can reboot or restart netwok daemon by /sbin/init.d/net stop and /sbin/init.d/net start.

ATB..

sudhakar