Change IP address for a server configured with APA

[Ryan Bernard]

Hi All

A server is configured with APA already, how should I change the IP address? Is is as per normal changing through SAM / netconf file?

Thanks in advance~!

[likid0 · Accepted solution]

Depends, if you are using apa as lan monitor, you need to modify the /etc/lanmon/lanconfig.ascii and change the ip, then use lanapplyconf.

If you are not using lan monitor, you can change the ip the normal way, in /etc/rc.config.d/netconf

[Sajjad Sahir]

Dear Ryan

if u are using APA follow up the above posting
if u are not using it

u have to change /etc/rc.config.d/netconf file
also /etc/hosts file

thanks and regards

Sajjad Sahir

[likid0]

just to clarify my last post:


Depends, if you are using apa as lan monitor, you need to modify the /etc/lanmon/lanconfig.ascii and change the ip, then use lanapplyconf.

If you are not using lan monitor BUT you are using normal APA, you can change the ip the normal way, in /etc/rc.config.d/netconf

[Ryan Bernard]

Thanks alot for your advice~!