cmcheckconf problem

[Filosofo]

Hello,
I have execute cmcheckconf after execute cmquerycl....
I see this error...
Error: Too many interfaces on nodeA for subnet 10.128.7.0, lan2 and lan0

But the number of interfaces is correct...an is up and running.

Please help

Filo

[Massimo Bianchi]

Hi, can you post a

netstat -in ?

I suspect that once you used the lan2 (or lan0), then ifconfig down lan2 and now it is configured but not used.

In this case, to clean it i suggest (assume lan0 is the wrong one):

ifconfig lan0 down
ifconfig lan0 0.0.0.0 netmask 255.255.255.255
ifconfig lan0 unplumb


and after that, re-try the cmcheckconf.

Massimo

[Sridhar Bhaskarla]

Hi Filo,

Looks like you have configured the same subnet on lan2 and lan0. Unconfigure one interface and try again.

ifconfig lan2 unplumb

-Sri