CMSCANCL....

[jmckinzie]

I am having an issue...
I get this when doing a cmscancl..

------ lan0 to lan1 ------
PPA 0 link test to 0x00306EEA341C (NO CONNECTION)

------ lan0 to lan2 ------
PPA 0 link test to 0x00306EEA04CC (NO CONNECTION)

------ lan1 to lan0 ------
PPA 1 link test to 0x000F201D9D63 (NO CONNECTION)

------ lan1 to lan2 ------
PPA 1 link test to 0x00306EEA04CC (NO CONNECTION)

------ lan2 to lan0 ------
PPA 2 link test to 0x000F201D9D63 (NO CONNECTION)

------ lan2 to lan1 ------
PPA 2 link test to 0x00306EEA341C (NO CONNECTION)

However, I can setup the LAN cards via crossover cable and give the cards IP addresses and they talk fine.

I just cannot linkloop...

Any ideas?

[Steven E. Protter]

Shalom Jody,

I have a server in my apartment that will not pass the link loop test no matter what. It does however work fine, even with a ServiceGuard heartbeat.

So the problem may not be a complet loser.

Note that you should not have to NIC cards on the same network on an HP-9000/Integrity system. Check the network infrastructure, there is a good possibility the problem is not on the system.

SEP

[jmckinzie]

it has to be on the system because i setup a crossover cable between the two and still cannot linkloop.

[jmckinzie]

Any other ideas on what to try?

[Marcel Boogert_1]

Jody,

What system are we talking about?

MB.

[Kevin Wright · Accepted solution]

when you linkloop -i , what error message is displayed?

Also, what type of lan cards?

[jmckinzie]

linkloop eventually solved the problem.

I had the config files incorrectly setup.