Command in Systemstart

[Asta Handke]

Wie kann ich den Befehl: /usr/bin/dcfd -l /tmp/dcf77.log -i 60 /dev/tty0p2
in die Systemstart integrieren?
How is it possible to integrate the command: /usr/bin/dcfd -l /tmp/dcf77.log -i
60 /dev/tty0p2 in the ux-start?
Many thanks for help, Asta.

[Melvyn Burnard_1]

I believe you should take a look at the file on a 10.20 system,
/usr/share/doc/start_up.txt, and I quote:

HP-UX 10.X Startup and Configuration
1. Introduction
This paper explains the 10.X system startup and configuration models

Otherwise I would recommend going to http://www.docs.hp.com, and read through
the HP-UX 10.x manuals using the attached link.