Config kernal for OLAR

[Norman Dignard]

We have a L3000 running 11i and I need to add 3 device drivers to the kernel. HP support said that I needs the following drivers:
OLAR_PSM
OLAR_PSM_IF
DEV_OLAR

How would I do that?

thanks
Norm Dignard

[Tom Geudens]

Hi,
I don't have 11i so I can't "see" what you actually have to do, but adding drivers is done under SAM -> Kernel Configuration -> Drivers.

Hope this helps,
Tom Geudens

[Helen French]

Hi Norman,

Check this for a helpful information:

http://us-support2.external.hp.com/cki/bin/doc.pl/sid=b6b1b7cb06d19a3ec5/screen=ckiSearchResults

You may reconfigure the kernel through SAM (SAM-Kernel configuration - configurable parameters ). Or
add kernel drivers to /stand/system. Once that is complete run mk_kernel then schedule the new kernel to be moved into place with the kmupdate command. Once the system is rebooted OLAR functionality should work.

HTH,
Shiju

[Sanjay_6]

Hi Nortman,

Try this latest SAM/OBAM patch,

http://us-support2.external.hp.com/wpsl/bin/doc.pl/screen=wpslDisplayPatch/sid=e88a670000e0a08c54?PACH_NAM=PHCO_23841&HW=s800&OS=11.11

Hope this helps.

regds