Config settings for Tachyon Fiber card

[Alan Casey]

Hi,

I have a Tachyon Fiber card A6795A installed on an rp7400 HP-UX 11.0 machine.
The sw was installed without making any manual config changes.

How can I tell what the config settings are for this card?

[Shaikh Imran · Accepted solution]

Hi,
Try using fcmsutil
see man pages for more details.
example
#fcmsutil /dev/td0
Where /dev/td0 is the device file which we get from ioscan.
#ioscan -fnC Tachyon

Regards,

[Cesare Salvioni]

Try the tool fcmsutil ... also search in the forum for A6795A, there are a lot of old question and links about this hardware