HPE Community
Operating System - HP-UX
1836642 Members
1720 Online
110102 Solutions
New Discussion

Re: Configure Multiple Vlan on asingle NIC

 
Bouvet
Occasional Contributor

‎06-25-2001 01:01 AM

‎06-25-2001 01:01 AM

Configure Multiple Vlan on asingle NIC

Is it possible to configure Multiple Vlan on a single NIC card, when the OS is HP-UX 11.0 and the NIC HBA is 1000BT TX (A4929A). The switch is 802.1q compliant.

0 Kudos
Reply
2 REPLIES 2
Rainer von Bongartz
Honored Contributor

‎06-25-2001 01:26 AM

‎06-25-2001 01:26 AM

Re: Configure Multiple Vlan on asingle NIC


should be.....

assign an ip-address and network with ifconfig lanx:y ...

you have to create a tagged switch port of course to connect your server to

regards

Rainer
He's a real UNIX Man, sitting in his UNIX LAN making all his UNIX plans for nobody ...
0 Kudos
Reply
Bruce Regittko_1
Esteemed Contributor

‎06-25-2001 05:21 AM

‎06-25-2001 05:21 AM

Re: Configure Multiple Vlan on asingle NIC

Hi,

Yes, I do this all the time in my classroom. Just issue an ifconfig command as noted above. Also, don't forget to update /etc/rc.config.d/netconf with the new information, if you want the new configuration to survive a reboot.

--Bruce
www.stratech.com/training
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.